IMG_4767
template-sunglasses
sunglasses

Making Wooden Sunglasses- Summer Woodworking Project

  In response to a request from a viewer, I decided to make some homemade wooden sunglasses, for summer. A project, which on the surface appears very simple, will take a fair bit of time and care to get just right, but despite the work involved, the end result is …

Tablesaw Crosscut Sled

  A cross-cut sled allows highly repeatable and accurate cross cuts (as the name suggests) to be performed with a tablesaw. Cross-cut sleds …

Video Blog | Back to University -24/04/14

  I’m back at university for the final few weeks before the summer. I answer a few questions as well as providing …

IMG_3905
vase-ts1
vase-ts2

Turning a Log into a Vase on the Wood Lathe

  In the following video I demonstrate how to turn a small wooden vase on the lathe, out of a log which …

Tablesaw Crosscut Sled: Panel Cutting Sled

  A cross-cut sled allows highly repeatable and accurate cross cuts (as the name suggests) to be performed with a tablesaw. Cross-cut sleds …

Video Blog | Carter and Son Toolworks, University…

The first Vlog in almost exactly 6 months! I briefly discuss where and what I am doing at university.       …

paper tray
paper tray 1
paper tray 2

Homemade Paper Tray (Free Plans)

During my first term at university I found myself swamped with various  sheets of paper and booklets, so I thought what better …

IMG_3230
IMG_3233
IMG_3238

Inside Out Woodturning – Christmas Tree Ornament

Although this video has come very late, I thought I should still post some kind of Christmas project! In the following video …

IMG_2793
IMG_2795
IMG_2796

Wooden Travel Mug / Coffee Cup

  With the cold weather beginning to set in for many of us, I thought now would be the perfect opportunity to …

1
2
3

Build a Cheap Woodworking Workbench (Free Plans)

A real woodworking workbench, fitted out with a vice, is something I have never had, but have been meaning to build for …

bbb1
bbb2
bbb3

Router Lathe Duplicator: Baseball Bat Using a Template

  I decided I would test out the finished lathe duplicator by turning a baseball bat. It’s not something which I will …